ページを印刷するof the filters is correct. An incorrect
installation causes water leakages.
INSTALLATION
• The appliance is heavy, be careful
when you move it.
• Do not transport your appliance with-
out the transit bolts, you can damage
internal components and cause leak-
ages or malfunctions.
• Do not install and connect a dam-
aged appliance.
• Make sure to remove all packaging
and transit bolts before first use.
• Make sure that the mains plug is dis-
connected from the mains socket
during installation.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• When you install the appliance on a
carpet floor, make sure that there is
air circulation between the appliance
and the carpet. Adjust the feet to
have the necessary space between
the appliance and the carpet.
Water connection
• Do not connect the appliance with
old hoses. Only use new hoses sup-
plied with the appliance.
• Make sure not to cause damage to
the water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some mi-
nutes, then connect the inlet hose.
• The first time you use the appliance,
make sure that the water hoses and
the couplings do not have leakages.
Electrical connection
• Make sure that the appliance is con-
nected to a correctly installed earth-
ed power outlet.
• Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Do not replace or change the mains
cable. Contact the service centre.
• Make sure not to cause damage to
the mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access
to the mains plug after the installa-
tion.
• Do not pull the mains cable to dis-
connect the appliance. Always pull
the mains plug.
• If this appliance is supplied from a
cord extension set or electrical porta-
ble outlet device, the cord extension
set or electrical portable outlet de-
vice must be positioned so that it is
not subject to splashing or ingress of
moisture.
• If the supply cord of this appliance is
damaged, it must be replaced by the
manufacturer, its service agent or
similarly qualified persons to avoid a
hazard.
DISCARD THE APPLIANCE
1.
Disconnect the mains plug from the
mains socket.
2.
Cut off the mains cable and discard
it.
3.
Discard the door catch. This pre-
vents children or pets being acci-
dentally closed inside the appli-
ance. There is a risk of suffocation
(only for front-loading appliances).
ENGLISH
5