- ページ 7

ラベルメーカー Brother PT-2040WのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother PT-2040W 17 ページ。

Brother PT-2040W ユーザーマニュアル

Printing Labels

Preview
• Pressing the Preview key displays all of the text
and the label length, then returns to the original
text.
• Only the text can be previewed, not the font,
style, size, underline/frame or any additional
features.
Feeding (Tape Feed)
+
• This function feeds approximately 1" (25 mm)
of blank tape.
• When using the Chain Print feature, after the
last label is printed, feed the tape.
• Do not pull the tape, as this may damage the
Tape Cassette.
Printing
[Set 1-9?1 ]
• If you need only one copy of the label, press
after you press
• You can print up to nine copies of each label.
• DO NOT touch the Tape Cutter Lever while the
message [Print] or [Feed] appears on the
LCD.
• To cut tape: When printing ends, press the
Tape Cutter Lever.
• To remove tape backing, fold the label
lengthwise (with the text facing inward), to
expose the inside edges that run down the
center of the tape backing. Peel and apply.
Using Print Options
[Numbering]
You can print a series of up to 10 labels using
auto-numbering. Use this feature to automatically
increase a selected number by 1 after each one is
printed.
Ex: Print copies of labels containing a serial
number (0123, 0124, and 0125)
/
-
.
(Enter numbers)
cursor to the number you wish to increment.
Option]
• Select the highest number you wish to print
when setting the number.
[Mirror]
Ex: To Mirror Print "J.SMITH", follow the
instructions below after entering "J.SMITH".
(Enter text or characters)
[Print Option]
[Mirror Print?]
• Use clear tape when using this function, so the
labels can be read correctly from the opposite
side when attached on glass, windows, or other
transparent surfaces.
by moving the
[Print
[Numbering]
[Mirror]