- ページ 15

ラベルメーカー Brother PT-E500のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother PT-E500 46 ページ。 Electronic labeling system
Brother PT-E500 にも：取扱説明書 (6 ページ)

ページを印刷する

• DO NOT expose the tape cassettes to direct sunlight, high temperatures, high humidity, or

dust. Store tape cassettes in a cool, dark place. Use the tape cassettes soon after opening

the tape cassette package.

• Markings made with oil-based or water-based ink may be visible through a label affixed

over them. To hide the markings, use two labels layered on top of each other or use a dark-

colored label.

• Any data stored in memory will be lost due to failure or repair of the P-touch labeling

system, or if the battery expires.

• When power is disconnected for more than two minutes, all text and format settings will be

cleared. Any text files stored in the memory will also be cleared.

• A protective clear plastic sticker is placed over the display during manufacturing and

shipping. This sticker should be removed prior to use.

• The length of the printed label may differ from the displayed label length.

• You can also use Heat Shrink Tube in this model.

Check the Brother website (http://www.brother.com/) for further information. You cannot

print frame, templates pre-set in the P-touch labeling system and a part of font settings

when using Heat Shrink Tube. The printed characters may be smaller than when using TZe

tape.

• The P-touch labeling system is not equipped with a charging feature for Ni-MH

rechargeable batteries.

• The printed label may differ from the image that appears on the LCD.

• Note that Brother Industries, Ltd. does not assume responsibility for any damage or injury

arising from the failure to follow the precautions listed in this manual.

• We strongly recommend that you read this User's Guide carefully before using your

P-touch labeling system, and then keep it nearby for future reference.

CD-ROM

• DO NOT scratch the CD-ROM, expose it to extremely high or low temperatures, place

heavy objects on top of it, or bend it.

• The software on the CD-ROM is intended for use with the P-touch labeling system and may

be installed on more than one computer.

The following symbols are used throughout this guide to indicate additional information.

This symbol indicates information or directions that may result in damage or injury if

ignored, or operations that will result in errors.

This symbol indicates information or directions that may help you understand and use

the P-touch labeling system more efficiently.

- ページ 15

Symbols Used in this Guide