ページを印刷する
4.8 Stain-Prewash button
Press button
8
to add the stain and/or
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
4.9 Spin button
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
4.10 Temperature button
Press button
10
to change the default
temperature. When the display shows
- -, the appliance does not heat the wa-
ter.
8
.
9
10
4.11 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
4.12 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
10
and button
9
until the display shows the symbol
• To deactivate the function, press but-
ton
and button
10
time until the symbol
You can activate the function:
• Before you press the Start/Pause but-
ton
4
: the appliance cannot start.
• After you press the Start/Pause button
4
, all the buttons and the pro-
gramme knob are deactivated.
4.13 Permanent extra rinse
function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button
6
and button
5
until the display shows the symbol
• To deactivate the function press but-
ton
and button
6
time until the symbol
ENGLISH
11
8
and button
7
at
at the same time
at the same
9
goes off.
at the same time
at the same
5
goes off.
.
.