- ページ 6

ラベルメーカー Brother QL 570 - P-Touch B/W Direct Thermal PrinterのPDF セットアップ&オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。Brother QL 570 - P-Touch B/W Direct Thermal Printer 45 ページ。 Professional label printer
Brother QL 570 - P-Touch B/W Direct Thermal Printer にも: パンフレット (4 ページ), ユーザーマニュアル (36 ページ), ユーザーマニュアル (26 ページ), ユーザーマニュアル (40 ページ), セットアップ&オペレーションマニュアル (43 ページ), ユーザーマニュアル (2 ページ), ソフトウェア・インストール・マニュアル (15 ページ)

Brother QL 570 - P-Touch B/W Direct Thermal Printer セットアップ&オペレーションマニュアル
4
Follow these guidelines to avoid fire, electric shock, or other damage.

Power Cord

Use only the authorized power source
(120V AC) for the machine.
Use only the power cord included with
the machine.
Do not handle the power cord or plug if
your hands are wet.
Do not overload the electrical outlet
sockets with too many appliances or
plug the power cord into a damaged
electrical outlet.
Follow these guidelines to avoid fire, electric shock, or other damage.
The Machine
The electrical outlet should be close to the machine and be easily accessible.
Power Cord
Always hold the power cord when unplugging the power cord from or plugging it into
the electrical outlet. Pulling on the power cord could cause problems.
Cutter
Do not touch the blade of the cutter.
Do not open the top cover when the cutter is operating.
Installation/Storage
Put the machine on a flat, stable surface
such as a desk.
DK Roll (DK Label, DK Tape)
Be careful not to drop the DK Roll.
DK Rolls use thermal paper and thermal
film. Both the label and print will fade
with sunlight and heat. Do not use DK
Rolls for outdoor use that requires
durability.
Warning
Do not cut, damage, alter or place heavy
objects on the power cord.
Do not use the power cord if it is
damaged.
Ensure the power cord is correctly
inserted into the electrical outlet.
If the machine will not be used for an
extended period, remove the power cord
from the electrical outlet.
Caution
Do not put any heavy objects on top of
the machine.
Depending on the area, material, and
environmental conditions, the label may
unpeel or become irremovable, the color
of the label may change or be
transferred to other objects.
Before applying the label, check the
environmental condition and the
material. Test the label by affixing a
small piece of it to an inconspicuous
area of the intended surface.