- ページ 24
洗濯機 AEG L 99696 HWDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AEG L 99696 HWD 48 ページ。 Front-loading washer
ページを印刷する
24
www.aeg.com
b. CUPBOARD DRY level - 2
c. EXTRA DRY level - 3 indicators
The display shows the time end and the
set drying programme.
2. Touch button Start/Pauze to start the
programme.
The text bar tells that the appliance is
drying.
The display shows the door locked
indicator and the programme in progress
indicator and, alternatively, the time
of the cycle end.
The display updates regularly the drying
cycle time (every minute).
11.3 Timed drying
1. Touch button Tijdgestuurd drogen
again and again to set the time value
(see the «Drying Programme» table).
The display shows 15 minutes for cottons
and synthetics programmes while starts
from 13 minutes for wool programme.
Each time you press this button the time
value increases by 5 minutes. The display
shows the set time value.
2. Press Start/Pauze to start the
programme. The text bar tells that
the appliance is drying.
On the display appear the door locked
and the programme in progress
indicators.
12. DAILY USE - WASHING & DRYING
12.1 NON-STOP programme
You can wash and dry your laundry
setting a «non stop-programme».
Proceed as follows:
1. Press button Aan/Uit for some
seconds to activate the appliance .
2. Load the laundry one item at a time.
indicators on: for cotton and
synthetic items
on : indicator for cotton items
You cannot set all dryness
levels for any type of
laundry.
WARNING!
Refer to Safety chapters.
The display shows alternatively, the
drying cycle duration and the time of the
cycle end.
The display updates regularly the drying
cycle value.
If the laundry is not sufficient
dry, set again a short drying
time.
11.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
comes on. The text
bar tells you that the programme is
completed.
• The indicator of button Start/Pauze
goes off. The door locked
off
• Press the button Aan/Uit for some
seconds to deactivate the appliance.
After some minutes from
the end of the
programme, the energy
saving function
automatically deactivates
the appliance.
1. Remove the laundry from the
appliance. Make sure that the drum
is empty.
2. Close the water tap.
3. Put the detergent and the additives
in the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry.
5. Set the available options.
goes