ページを印刷する
8
www.aeg.com
4.3 Phase indicators
A) After pressing the Start/Pause button,
the Washing indicator illuminates. The
appliance is operating.
Duration of the selected programme
• After setting a programme, the duration is displayed in hours and mi-
nutes (for example
• After the programme has started, the remaining time is updated every
minute.
Delay Start
• When setting a delay start, the display shows the delay time (20 hours
max.) for about 3 seconds (for example
programme duration again.
• The delay time value decreases by one unit every hour and then, one
hour before the end of the programme, the time decreases in one mi-
nute intervals.
Incorrect option selection
• If the selected settings are not possible, the display shows the message
Err and the yellow light of Start/Pause button starts flashing.
Alarm codes
• If operating problems occur, the display will show various alarm codes,
for example
End of programme
• At the end of the programme, the display shows a flashing zero
Delay Start indicator
Child safety lock indicator
A
B
C
).
(see chapter «Troubleshooting»).
B) The Door indicator indicates when the
door can be opened:
• indicator on: the door cannot be
opened.
• indicator flashing: the door is opening
in some minutes.
• indicator off: the door can be opened.
C) When the appliance performs
additional rinses, the Extra Rinse
indicator illuminates.
), and then it shows the
.