ページを印刷する
32
www.aeg.com
Problem
Too much foam in the
drum during the washing
cycle.
After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
14. CONSUMPTION VALUES
The data in this table are approximate. Different variables can affect the
data: the quantity and type of laundry, the water and ambient tempera-
ture.
During the washing programme, the Prosense technology can vary the
wash duration and the consumption values. For more details see 'The
Prosense load detection' paragraph in 'Daily Use' chapter.
Programmes
Cottons 60°C
Cottons 40°C
Synthetics 40°C
Delicates 40°C
Wool/Silk 30°C
Standard cotton programmes
Standard 60°C cotton
Standard 60°C cotton
Possible solution
Reduce the quantity of detergent.
Make sure that the flap is in the correct position (UP for pow-
der detergent - DOWN for liquid detergent).
Make sure you have used the detergent dispenser according
the indications given in this user manual.
Load
Energy
(kg)
consump-
tion (kWh)
9
1,58
9
1,30
3
0,74
3
0,54
1,5
0,42
9
0,95
4,5
0,64
Water
Approxi-
consump-
mate pro-
tion (litre)
gramme
duration
(minutes)
84
240
82
210
61
140
62
95
62
75
53
248
43
209
Remain-
ing mois-
1)
ture (%)
52
52
35
35
30
52
52