- ページ 34

ラベルメーカー Brother TD-4100NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Brother TD-4100N 37 ページ。 Network users manual - spanish
Brother TD-4100N にも：技術仕様 (4 ページ), ソフトウェア取扱説明書 (40 ページ), ネットワーク・ユーザー・マニュアル (39 ページ), ユーザーマニュアル (36 ページ), マニュアル (20 ページ), (スペイン語）グ (40 ページ), (スペイン語）取扱説明書 (39 ページ)

STEP 3 Reference

Problem

When printing via the USB

cable, the printer repeatedly

pauses and then continues

printing.

An error occurred because the

roll could not be fed to the

beginning of the label.

• Is the printer set for sequential printing?

For Windows

XP:

If so, set print mode to buffered printing. (Open the printer

properties from [Control Panel] - [Printer and other hardware] -

[Printer and Faxes] and click [Printing Preferences...] button in

the [General] tab. Choose the option "After one page of data is

received".)

For Windows Vista

If so, set print mode to buffered printing. (Open printer properties

from [Control Panel] - [Hardware and Sound] - [Printers] and click

[Printing Preferences...] button in the [General] tab. Choose the

option "After one page of data is received".)

For Windows

If so, set print mode to buffered printing. (Open printer properties

from

- [Devices and Printers], right-clicking the printer whose

settings are to be changed, and selecting [Printing preferences].

Choose the option "After one page of data is received".)

• An alternative solution is to disconnect the LAN cable until USB

printing is completed.

• The procedure for feeding to the beginning of the label is

different for die-cut labels and continuous length label. See

"Setting the RD Roll" on page 12.

• When using die-cut labels with a length of 152 mm or more, an

error may occur if the TD-4000/4100N cannot detect the

beginning of the label after the first time that the roll is fed. To

clear the error, press the Feed button again.

Solution