ページを印刷する
28
www.aeg.com
2. Remove the top part of the additive
compartment to aid cleaning and
flush it out under running warm
water, to remove any traces of
accumulated detergent. After
cleaning, put the top part back into
position.
3. Make sure that all detergent residue
is removed from the upper and lower
14.9 Cleaning the drain pump
Regularly check the drain pump filter and make sure that it is clean.
Clean the drain pump if:
• The appliance does not drain the water.
• The drum does not turn.
• The appliance makes an unusual noise because of the blockage of the drain pump.
• The display shows the alarm code
WARNING!
• Disconnect the mains plug from the mains socket.
• Do not remove the filter while the appliance operates.
• Do not clean the pump if the water in the appliance is hot. Wait until
• Repeat Step 3 several times by closing and opening the valve until the
Always keep a rag nearby to dry up any water spillages when removing the filter.
1
the water cools down .
water stops flowing out.
part of the recess. Use a small brush
to clean the recess.
2
4. Insert the detergent drawer into the
guide rails and close it. Run the
rinsing programme without any
clothes in the drum.