- ページ 19
ノートパソコン Fujitsu V1010 - LifeBook - Core 2 Duo 1.6 GHzのPDF バイオマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu V1010 - LifeBook - Core 2 Duo 1.6 GHz 29 ページ。 V1010 getting started guide (french)
Fujitsu V1010 - LifeBook - Core 2 Duo 1.6 GHz にも： はじめに (2 ページ), (仏）導入マニュアル (2 ページ)
ページを印刷する
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current security configuration. Follow
the instructions for navigating through the Setup Utility
to make any changes. (See Navigating through the Setup
Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the Security menu and its submenus, all of the
options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and no
write protection.
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
F1
Help
ESC
Exit
PhoenixBIOS Setup Utility
Advanced
Security
Select Item
-/Space
Select Menu
Enter
Figure 12. Security Menu
■
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the Enter key and then retype the pass-
word. Press the Esc key to abort the
password setting process.
Entering a password incorrectly 3 times
■
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled] to be displayed.
If this happens restart the computer by
turning off and on the power with the
power switch and use the correct pass-
word on reboot.
■
If the Power Management Security is
Enabled and the Password on Boot is
Disabled you will not have to type your
password upon resuming the system
from the Standby or Hibernate modes.
Power Management Security will work
only if Password boot is enabled.
Boot
Info
Exit
Clear
Clear
Press <Enter> key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
[Disabled]
Then password entry is
[Disabled]
required to enter BIOS
[Disabled]
Setup.
[All]
[Enabled]
Change Values
Select Sub-Menu
S e c u r i t y M e n u
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
19