- ページ 10

ファックス Brother DCP 8060のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP 8060 23 ページ。 Windows vista
Brother DCP 8060 にも：クイック・セットアップ・マニュアル (37 ページ), クイック・セットアップ・マニュアル (24 ページ)

STEP 2

Installing the Driver & Software

Click Finish to restart your computer. After

restarting the computer, you must be logged on

with Administrator rights.

Note

After restarting the computer, the Installation

Diagnostics will run automatically. If the

installation is unsuccessful, the installation results

window will be shown. If the Diagnostics shows a

failure, please follow the on-screen instructions or

read the on-line help and FAQs in

Start/All Programs/Brother/XXX-XXXX (where

xxx-xxxx is your model name).

The MFL-Pro Suite has been installed

completely.

For MFC-3360C users

Insert the USB cable to the USB port marked

with a

symbol. You will find the USB port

next to the handset cord socket as shown

below.

Connect the USB cable to your computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

• Make sure you use a USB 2.0 cable that is no

longer than 6 feet long (2 meters).

Turn on the machine by connecting the power

cord.

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another, please wait for a

while.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Windows