- ページ 25
ファックス Brother DCP-110CのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-110C 35 ページ。 Facsimile equipment
Brother DCP-110C にも： クイック・セットアップ・マニュアル (24 ページ), ラピード設定マニュアル (24 ページ), 部品リファレンスリスト (30 ページ)
ページを印刷する
For Network Interface Cable Users (DCP-310CN only)
For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 9.
1
Disconnect the machine from the power
socket and from the Macintosh
already connected an interface cable.
(Example for the U.K.)
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
®
8.6 to 9.2 Users
®
, if you have
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
To connect the network interface cable to
the machine:
1. Lift the scanner cover to its open
position.
2. Connect the network cable into the LAN
socket, marked with a
will find the LAN socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the network cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
In case of using both USB and LAN cables,
guide both cables through the trench.
®
.
symbol. You
Continued...
23