- ページ 15

サーバー Fujitsu BR5450のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu BR5450 22 ページ。 Blade server systems, fibre channel connection blade

5. Perform the appropriate action based on whether you are using DHCP.

•

If you are using DHCP, enable it by selecting DHCP enable and clicking Apply.

•

If you are not using DHCP, uncheck the DHCP Enable check box, enter the appropriate information in the IP

Address, Subnet Mask, and Gateway fields, and click Apply.

6. Click the Reload Settings button to view the new IP address. It could take up to three minutes for the settings to

reload.

NOTE

Refer to the PRIMERGY BX900 Management Blade User Guide for additional details.

Connecting the Embedded Switch Module to the Ethernet network

The Embedded Switch Module has one external port and two internal ports that interact with the chassis. Once you

have successfully set the appropriate IP address of the Embedded Switch Module, you can establish an Ethernet

connection using one of two methods:

•

The PRIMERGY BX900 Management Blade application through an internal port.

•

Through the external Fabric port.

The internal Ethernet connection is the default configuration and no action is required.

Figure 8

shows the default port control setting on the PRIMERGY BX900 Management port.

FIGURE 8

PRIMERGY BX900 Management Port Control defaults to Internal Port

14 of 20

Brocade 5450 Embedded Switch Module QuickStart Guide

Publication Number: 53-1001265-02