- ページ 28

ファックス Brother DCP120C - Flatbed Multifunction Photo Capture CenterのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP120C - Flatbed Multifunction Photo Capture Center 33 ページ。 Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center にも：クイック・セットアップ・マニュアル (24 ページ), 部品リファレンスリスト (30 ページ), クイック・セットアップ・マニュアル (33 ページ), (フランス語) 迅速設置ガイド (24 ページ)

STEP2

Installing the Driver & Software

For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4-9.

Disconnect the machine form the power

socket.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OS 9.1-9.2 icon to

install the printer and scanner drivers. If the

language screen appears, choose your

language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and restart

your Macintosh

Lift the scanner cover to its open position.

9.1 to 9.2

Connect the network cable to the LAN socket

marked with a

LAN socket above and to the left of the ink

cartridge slots, as shown below.

Carefully guide the network cable into the

trench as shown below, following the trench

around and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

In case of using both USB and LAN cables, route

both cables through the trench.

Lift the scanner cover to release the lock.

Gently push the scanner cover support down

and close the scanner cover.

Turn on the machine by plugging in the power

cord.

Macintosh

symbol. You will find the