- ページ 6

サーバー Fujitsu ETERNUS DX DiskのPDF 設定マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ETERNUS DX Disk 24 ページ。 Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk にも：ユーザーマニュアル (35 ページ), ユーザーマニュアル (42 ページ), 設定マニュアル (28 ページ), 設定マニュアル (44 ページ), 設定マニュアル (28 ページ), 設定マニュアル (29 ページ), 設定マニュアル (25 ページ), 設定マニュアル (32 ページ), 設定マニュアル (35 ページ), 設定マニュアル (31 ページ), 設定マニュアル (43 ページ), 設定マニュアル (21 ページ)

Chapter 1

Workflow

This chapter describes how to connect the ETERNUS DX to a server running Linux.

Which documents need to be referred to varies with the connection environment. Refer to the workflow that

follows to determine which documents are required.

Required Documents

"Server Support Matrix"

•

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX to

•

be connected

"Configuration Guide -Server Connection- (Fibre Channel/FCoE/iSCSI/SAS) for Linux device-mapper multi-

•

path"

"ETERNUS Web GUI User's Guide"

•

Manuals supplied with the server, SAS cards, and multipath driver

•

1.1

The documents and workflow required when a multipath driver is not used are as follows.

Workflow

Setting Up the ETERNUS DX

Set the various parameters required to operate the ETERNUS DX.

•

Checking the setup and maintenance operations

"Chapter 2 Checking the Server Environment" (page 10)

"Chapter 4 Setting Up the ETERNUS DX" (page 13)

"ETERNUS Web GUI User's Guide"

Setting up the ETERNUS DX

•

"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-

NUS DX to be connected

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Linux

P3AM-3472-14ENZ0