- ページ 23

サーバー Fujitsu FUTRO S5010のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Fujitsu FUTRO S5010 36 ページ。

ページを印刷する

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs

before connecting external devices!

Do not connect or disconnect cables during a thunderstorm.

Always hold the plug of a cable when removing it. Never unplug a

cable by pulling the cable itself.

To ensure that your device works properly, use only the connection cable

supplied or use a high-quality connection cable.

Ports on the device

Device

Externaldevices

Ports

The ports are located on the front and rear of the device. The ports available on

your device depend on the conﬁguration level you have selected. The standard ports

are marked with the symbols shown below (or similar).

Headphone port, black (front

of device)

Headphones

Headphoneport

RJ45-LAN port

LANport

USB 3.1 - Universal Serial

Bus, Gen 1 Type-A: blue,

Gen1 type-C: black

UniversalSerialBus

USB 2.0 - Universal Serial

Bus, type-A: black

Some of the connected devices require special software (e.g. drivers) (refer to the

documentation for the connected device and operating system).

Connecting a monitor

Only attach the screen to your device when it is switched off.

► Follow the instructions contained in the monitor manual to prepare the monitor

for operation (e.g. connecting cables).

Monitor,

► Connect the data cable to the required monitor port on your device.

► Plug the monitor power cable into the grounded mains outlet.

Fujitsu

Microphone port, black (front of device)

Microphone

Microphoneport

Serial port

Serialport

DisplayPort

Audio output (Line Out), black

Lineout

Audiooutput

Getting started