- ページ 21

サーバー Fujitsu PRIMEPOWER 2500のPDF ハードウェア・プラットフォーム・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMEPOWER 2500 50 ページ。 Enterprise servers
Fujitsu PRIMEPOWER 2500 にも：マニュアル (21 ページ)

ページを印刷する

Fujitsu PRIMEPOWER 2500 ハードウェア・プラットフォーム・マニュアル

Chapter 4 Secondary LAN port on

PRIMEPOWER250/450

This chapter describes how to use the secondary LAN (10/100/1000Mbps) port on PRIMEPOWER250/450.

4.1

Outline

The secondary LAN port on PRIMEPOWER250/450 is controlled by FUJITSU PCI Gigabit Ethernet

Driver (Interface name is "fjgi") included in Solaris 10.

4.2

Notes

When using 1000 Mbps communication, be sure to set Autonegation to 'on'.

If using the PCI card (PW008GE4/PW008GE5/PW008QG1), please refer to the User's guide attached

with the PCI card.

4.3

How to Set Configuration Information

This section describes required setting to use a fjgi interface.

4.3.1 Environment Setting

This section describes how to edit files required to build environment.

4.3.1.1

Determining the Client Name of Target Driver

To use the secondary LAN port as an IPv4 interface:

To allocate the IP address or hostname to the fjgi interface, edit /etc/hostname.fjgi* (* is an numerical

value) file. About netmask value, please see "4.3.1.3 Defining Netmask Value" .

Example /etc/hostname.fjgi*:

Define the unique hostname:

giga-v4

or, define the IP address:

192.168.150.1

Note: If you defined the hostname in hostname.fjgi* file, see the section "4.3.1.2 Defining Hostname "

for detailed information.

To use the secondary LAN port as an IPv6 interface

To allocate the IP address and prefix to the fjgi interface, edit /etc/hostname6.fjgi* (* is an numerical

value) file.