- ページ 36

サーバー Fujitsu PRIMERGY B900のPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY B900 36 ページ。 Blade server systems, contents of the mmb s1 help system

ページを印刷する

Rack

and DHCPv6 (for the IP and DNS settings) and provides spin boxes to

define two DNS addresses.

AuDi-MIP: Allows to enable AuDi-MIP. The IP addresses are

distributed to server and connection blades by using a common IP

address range.

Power Settings: Allows to enable PSU control, to adjust the PSU dynamic mode

•

and the PSU redundancy level, and to select the display unit for the power

consumption (Watt or BTU/h).

PIN Settings: The PIN menu enables the user to define a PIN number. The PIN

•

number protects the Local Service Display against unauthorized access.

Ekeying Check: Reports the number of ekeying mismatch conflicts. Shows the

•

details of each ekeying mismatch conflict.

Export Settings: The Export Settings menu is used to copy the current system

•

unit settings to a local file or a file on a USB memory stick.

Rack

When cascading system units ("Interconnect") are integrated into a rack, these are

displayed on this page. This view is enabled by means of Base Configuration Wizard –

Network Settings – Interconnect. If the rack contains only one system unit, just the view

of the upper left-hand navigation frame is repeated.

VIOM Manager

This page of the GUI appears only when the VIOM Manager has taken over control of

the server blades at least once. It displays the IP address of the Management Station on

which the VIOM Manager is running, as well as a software identifier (GUID) of the

VIOM Manager. All values manipulated by the VIOM Manager are reset via the control

box, i.e. the virtualization is canceled again.