- ページ 10

サーバー Fujitsu PRIMERGY BX620 S5のPDF オプション・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY BX620 S5 50 ページ。 Server blade

ページを印刷する
Fujitsu PRIMERGY BX620 S5 オプション・マニュアル
Structure of the server blade
1
I/O daughter card (Fibre Channel or Gigabit Ethernet daughter card),
optional
2
CPU 2 with heat sink
3
Slots for the CPU 2 memory modules
4
USB Flash Module (UFM)
5
Lithium battery (on the system board)
6
Trusted Platform Module (TPM)
7
Control panel board with foil cable
8
2.5-inch hard disk module 1 (SAS or SATA)
9
2.5-inch hard disk module 2 (SAS or SATA)
10
Storage module
11
Slots for the CPU 1 memory modules
12
CPU 1 with heat sink
13
DIP switch (on the system board)
I
The memory modules, the I/O daughter card and the storage module
must be installed in the server blade before it is placed in the basic unit.
DIP switch settings
The server blade comes with the DIP switches set in the following positions:
Switch
Function
1
Delete password
2
Clear CMOS memory (NVRAM)
3
Restore system BIOS
4
Reserved
5
Reserved
6
Reserved
Table 1: Preset DIP switches
10
Options Guide
Introduction
Default
OFF
OFF
OFF
OFF
ON
ON
BX620 S5