- ページ 18

サーバー Fujitsu PRIMERGY BX900のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY BX900 22 ページ。 Blade server systems, fibre channel connection blade

ページを印刷する

6. Check the LEDs to verify that all components are functional.

For information about LED patterns, see the Brocade 5450 Embedded Switch Module Hardware Reference

Manual.

Verify the correct operation of the Embedded Switch Module by typing the switchShow command from the

workstation.

This command provides information about Embedded Switch Module and port status.

8. Verify the correct operation of the Embedded Switch Module in the fabric by typing the fabricShow CLI command

from the workstation.

9. Back up the Embedded Switch Module configuration to an FTP server by typing the configUpload command and

following the prompts.

This command uploads the Embedded Switch Module configuration to the server, making it available for

downloading to a replacement Embedded Switch Module if necessary. Brocade recommends backing up the

configuration on a regular basis to ensure that a complete configuration is available for downloading to a

replacement Embedded Switch Module.

For specific instructions about how to back up the configuration, see the Fabric OS Administrator's Guide. The

switchShow, fabricShow, and configUpload commands are described in detail in the Fabric OS Command

Reference.

Changing from Fabric OS Native to Access Gateway mode

The Embedded Switch Module ships from the factory in Fabric OS Native mode. Converting to Access Gateway mode

allows you to use the module as a device management tool that transparently connects hosts to the fabric.

Before you change the Embedded Switch Module from Fabric OS Native mode to Access Gateway mode, note the

following points:

•

Determine if the Embedded Switch Module is running in Fabric OS Native mode by entering the switchShow CLI

command to display the current switch configuration. If running in Fabric OS Native mode, the switchMode

parameter should display Native.

•

Enabling Access Gateway mode is a disruptive process because the switch is disabled and rebooted. Once you

enable the Embedded Switch Module in Access Gateway mode, only a limited subset of Fabric OS commands

are available and all fabric-related service requests are forwarded to the fabric switches.

•

When you enable Access Gateway mode, some fabric information is erased, such as the zone and security

databases. To recover the information, save the switch configuration before enabling Access Gateway mode.

Configure your Embedded Switch Module to run in Access Gateway mode using the following instructions. You can

log into the Embedded Switch Module and enable Access Gateway mode using either Web Tools or the Embedded

Switch Module CLI.

NOTE

Refer to the Access Gateway Administrator's Guide for the latest information on configuring in Access Gateway mode.

Brocade 5450 Embedded Switch Module QuickStart Guide

Publication Number: 53-1001265-02

17 of 20