- ページ 31

サーバー Fujitsu Primergy RX100 S4のPDF サービス補足マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu Primergy RX100 S4 43 ページ。
Fujitsu Primergy RX100 S4 にも：スタートマニュアル (8 ページ)

Replacement routines

Ê Lower the system board carefully into the chassis.

Ê Adjust the system board. If necessary adjust the position of the system

board with a gentle twisting motion.

Ê Fasten the system board with the nine screws.

Ê Reconnect the cables to their original connectors (see the cabling plans in

the Options Guide).

Ê Install the memory modules (for a description see the Options Guide).

Ê Install the processor (for a description see

on page

25).

Ê Install the riser card holder in its former slot (for a description see the Options

Guide). If controllers have been installed, connect their cables.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

Ê Connect all external cables.

CAUTION!

After installing the new system board, it is necessary to update the BIOS

to ensure proper operation (for a description see the BIOS Manual).

After installing the new LED board, it is necessary to program the

ChassisID prom with the help of the "ChassisIDProm Tool" to enable

ServerView and ServerStart to identify the system.

You will find the tool on the ServerSupport CD and/or it can be

downloaded from the Fujitsu Siemens Computers Service and

Support page (URL:

http://extranet.fujitsu-siemens.com/service/information/intelservers/tools).

RX100 S4

section "Replacing the processor"

Service Supplement

Replacing the system board