- ページ 41
サーバー Fujitsu PRIMERGY TX100 S1のPDF サービス補足マニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu PRIMERGY TX100 S1 46 ページ。 For tx100 s1
Fujitsu PRIMERGY TX100 S1 にも： 仕様 (13 ページ), オプション・マニュアル (46 ページ), テクニカル・マニュアル (32 ページ)
ページを印刷する
Replacement routines
V
CAUTION!
Advise the customer that he must provide you with TPM backup copies.
For security reasons, the TPM must be restored/re-saved by the
customer. If the customer DOES NOT have a backup copy available,
inform him that replacing the TPM will cause him to lose all his data.
Ê Open the server and remove the air duct as described in
ration" on page
Ê Lay the server on its left side (as seen from the front).
Ê Remove all external cables.
Ê Remove the system fan 2 as described in
fan 2" on page 29
Ê Remove all controllers from their slots (for a description see the Operating
Manual and the Options Guide). Take note of the slots of the controllers and
the cabling.
Ê Remove the heat sink and the processor as described in
processor" on page
Ê Remove the memory modules (for a description see the Options Guide).
Ê Remove all cables which may be connected to the system board.
TX100 S1
17.
35.
Service Supplement
Replacing the system board
section "Prepa-
section "Replacing the system
"Replacing the
41