- ページ 25
ファックス Brother ImageCenter ADS2500WのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother ImageCenter ADS2500W 37 ページ。 High-speed desktop document scanner
Brother ImageCenter ADS2500W にも: 製品安全マニュアル (20 ページ), マニュアル (16 ページ), マニュアル (20 ページ), パンフレット (2 ページ)
For Wireless Network Users
Troubleshooting
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
How can I find the wireless security information (SSID and Network Key)
1) You should see the documentation provided with your wireless access point/router.
2) The default SSID could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
* The Network Key may also be described as the Password, Security Key or Encryption Key.
* If the WLAN access point/router is not broadcasting the SSID, the SSID will not automatically be detected.
You will have to manually enter the SSID name. See Configuring your machine when the SSID is not
broadcasting in the Network User's Guide.
Error codes
If the LCD shows an error code in the table below, refer to the following instructions and correct the error.
Error code
The wireless setting is not activated, turn the wireless setting to ON.
- If a network cable is connected to your machine, disconnect it and turn the wireless setting
of your machine to ON.
TS-01
1. On your machine, press
2. Press WLAN, and then Setup Wizard.
3. When Enable WLAN? is displayed, press Yes. This will start the wireless setup wizard.
The wireless access point/router cannot be detected.
1. Check the following 4 points.
- Make sure that the wireless access point/router is powered on.
- Move your machine to an obstruction-free area, or closer to the wireless access
point/router.
- Temporarily place your machine within about 3.3 feet (one meter) from the wireless
access point when you are configuring the wireless settings.
TS-02
- If your wireless access point/router is using MAC address filtering, confirm the MAC
address of the Brother machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/authentication
method/encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and re-enter the correct information as
necessary.
See How can I find the wireless security information (SSID and Network Key) on page 25 to
confirm.
Recommended Solutions
and Network.
25