- ページ 8
ファックス Brother MFC 7820N - Network Monochrome Laser Multifunction CenterのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC 7820N - Network Monochrome Laser Multifunction Center 38 ページ。 Quick setup guide - french
Brother MFC 7820N - Network Monochrome Laser Multifunction Center にも： 部品リファレンスリスト (30 ページ), ユーザーマニュアル (3 ページ), (フランス語) ラピッド設定マニュアル (38 ページ)
ページを印刷する
Step 1
Install the Power Cord
3
and Phone Line
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the socket on the machine marked LINE
and the other end to a modular wall socket.
Warning
■ The machine must be fitted with an earthed plug.
■ Since the machine is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power cord connected to
your machine when you connect it to a telephone
line. Similarly, you can protect yourself when you
want to move your machine by disconnecting the
telephone line first and then the power cord.
6
Setting Up the Machine
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering machine,
connect it as shown below.
Please set the receive mode to External
TAD if you have an external answering
machine.
For more details, see "Connecting an
external telephone answering device
(TAD)" in the Appendix of the User's
Guide.
TAD
TAD