- ページ 26
ファックス Brother MFC MFC-465CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC MFC-465CN 39 ページ。 Brother multifunction printer quick setup guide
Brother MFC MFC-465CN にも： クイック・セットアップ・マニュアル (38 ページ)
ページを印刷する
- 1. Connecting the Power Cord and Telephone Line
- 2. For Usb Interface Users
- 3. (For Windows ® 2000 Professional/Xp/ Xp Professional X64 Edition/Windows Vista™)
- 4. For Network Interface Users
- 5. For Network Interface Users (for Mac os ® X 10.2.4 or Greater)
- 6. Bradmin Light Utility (for Windows ® Users)
STEP 2
Installing the Driver & Software
14
For Windows
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows
the User's Guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP
port 54926.
If you still have trouble with your network
connection, add UDP port 137.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for your
network.
• If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network by following the on-
screen instructions.
24
®
XP SP2/Windows Vista™
®
Firewall, see
15
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
Note
For Windows Vista™, when this screen appears,
click the check box and click Install to complete
the installation properly.
16
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
17
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQ's in
Start/All Programs/Brother/MFC-XXXX.
®
Windows