- ページ 24

ファックス Brother MFC MFC-465CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC MFC-465CN 38 ページ。 Brother multifunction printer quick setup guide
Brother MFC MFC-465CN にも：クイック・セットアップ・マニュアル (39 ページ)

ページを印刷する

1. Connecting the Power Cord and Telephone Line

STEP 2

Installing the Driver & Software

For Windows

users, when this screen appears, choose

Change the Firewall port settings to enable

network connection and continue with the

installation. (Recommended) and click Next.

If you are not using the Windows

the User's Guide for your software for

information on how to add the following

network ports.

For network scanning, add UDP port

54925.

For network PC-Fax receiving, add UDP

port 54926.

If you still have trouble with your network

connection, add UDP port 137.

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

Next.

This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically.

If your machine shows APIPA in the IP Address

field, click Configure IP Address and enter an IP

address for your machine that is suitable for your

network.

• If the machine is not yet configured for use on your

network, the following screen appears.

Click OK.

The Configure IP Address window will appear.

Enter an IP address for your machine that is

suitable for your network by following the

on-screen instructions.

XP SP2/Windows Vista™

Firewall, see

The installation of the Brother drivers will

automatically start. The installation screens

appear one after another. Please wait, it will

take a few seconds for all the screens to

appear.

Improper Setup

DO NOT try to cancel any of the screens during

this installation.

Note

For Windows Vista™, when this screen appears,

click the check box and click Install to complete

the installation properly.

When the On-Line Registration screen is

displayed, make your selection and follow the

on-screen instructions.

Click Finish to restart your computer.

After restarting the computer, you must be

logged on with Administrator rights.

Note

After restarting the computer, the Installation

Diagnostics will run automatically. If the

installation is unsuccessful, the installation results

window will be shown. If the Diagnostics shows a

failure, please follow the on-screen instructions or

read the on-line help and FAQ's in

Start/All Programs/Brother/MFC-XXXX.

Windows