- ページ 6

ファックス Brother MFC-210CのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-210C 37 ページ。 Facsimile equipment
Brother MFC-210C にも：クイック・セットアップ・マニュアル (40 ページ), クイック・セットアップ・マニュアル (37 ページ), 部品リファレンスリスト (30 ページ)

Step 1

Removing the Protective

Parts

Remove the protective tape.

DO NOT connect the USB cable.

Connecting the USB cable is done

when installing the driver.

Installing the Handset

(MFC-620CN only)

Connect the curled handset cord to the

handset.

You can load up to 100 sheets of 20 lb

paper.

For more details, see "About paper" in

Chapter 1 of the User's Guide.

Pull the paper tray completely out of the

machine and remove the output paper tray.

Setting Up the Machine

Press and slide the paper guide to fit the

paper width.

Paper Side Guide

Pull out the paper support and unfold the

paper support flap.

Paper Support Flap

Use the paper support flap for Letter, Legal

and A4 size paper.

Fan the stack of paper well to avoid paper

jams and mis-feeds.

Gently insert the paper into the paper tray

print side down and top edge first.

Check that the paper is flat in the tray and

below the maximum paper mark.

■ Make sure the paper side guides touch the

sides of the paper.

■ Be careful that you do not push the paper

in too far; it may lift at the back of the tray

and cause paper feed problems.

Put the output paper tray back on and push

the paper tray firmly back into the machine.

Paper Support