- ページ 6
ファックス Brother MFC-3320CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-3320CN 42 ページ。 Quick setup guide - english
Brother MFC-3320CN にも： クイック・セットアップ・マニュアル (42 ページ), サービスマニュアル (13 ページ)
ページを印刷する
Step 1
Removing the Protective
1
Parts
1
Remove the protective tape and paper in
the ADF.
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
2
Open the control panel cover by pulling it
toward you (1), and then lift the top cover
toward the back (2).
Control Panel Cover
3
Pull the protective yellow bar out of the
machine.
Do not throw away the protective yellow bar.
You will need it in the future to transport the
machine.
4
Close the top cover, and then close the
control panel cover.
4
Setting Up the Machine
Top Cover
Protective Yellow Bar
Attaching the Paper Tray
2
and Supports
1
Insert the paper tray from above into the
back of the MFC.
2
Attach the ADF document support.
3
Attach the output paper support to the paper
output slot, and then pull out the extension.
Output Paper Support
Output Paper
Support Extension
4
Attach the ADF document output support.
ADF Document
Output Support
Paper Tray
ADF Document
Support