- ページ 8

ファックス Brother MFC-440CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-440CN 34 ページ。 Quick setup guide - english
Brother MFC-440CN にも：サービスマニュアル (5 ページ), セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (35 ページ), サービスマニュアル (17 ページ)

STEP1

Setting Up the Machine

Connecting the phone line

Connect the telephone line cord. Connect one

end of the telephone line cord to the socket on

the machine marked LINE and the other end to

a modular wall socket.

Improper Setup

DO NOT connect the interface cable.

Connecting the interface cable is done during

the software installation process.

Note

If you are sharing one phone line with an external

telephone, connect it as shown below.

1 Extension telephone

2 External telephone

Note

If you are sharing one phone line with an external

telephone answering machine, connect it as

shown below.

• The machine must be fitted with an earthed plug.

• Since the machine is grounded through the power

outlet, you can protect yourself from potentially

hazardous electrical conditions on the telephone

network by keeping the power cord connected to

your machine when you connect it to a telephone

line. Similarly, you can protect yourself when you

want to move your machine by disconnecting the

telephone line first and then the power cord.

Set the receive mode to 'External TAD' for

MFC-440CN, or 'Manual' for MFC-660CN, if

you have an external answering machine.

For details, see Connecting an external TAD

(telephone answering device) in Chapter 7 of

the User's Guide.

Connect the power cord.

Warning