- ページ 25

ファックス Brother MFC-5460CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-5460CN 34 ページ。 Mfc-5460cn; mfc-5860cn
Brother MFC-5460CN にも：セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (34 ページ), サービスマニュアル (9 ページ), クイック・セットアップ・マニュアル (21 ページ)

Installing the Driver & Software

For USB Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4 through 13.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

Lift the scanner cover until it locks securely into

the open position.

Insert the USB cable into the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock (

Gently push the scanner cover support down

(

) and close the scanner cover (

Turn on the machine by connecting the power

cord.

Turn on your Macintosh