- ページ 27

ファックス Brother MFC-5860CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-5860CN 34 ページ。 Mfc-5460cn; mfc-5860cn
Brother MFC-5860CN にも：セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (34 ページ), サービスマニュアル (9 ページ)

Installing the Driver & Software

For Network Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4 through 13.

Lift the scanner cover until it locks securely into

the open position.

Connect the network cable to the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

X 10.2.4 or greater)

symbol. You will find the

Note

If both USB and LAN cable are being used, guide

both cables through the trench with one on top of

the other.

Lift the scanner cover to release the lock (

Gently push the scanner cover support

down (

) and close the scanner cover (

Note

Make sure that the machine is turned on by

connecting the power cord.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

Macintosh