ID No.
0 to 7
Can be set as the ID
8, 9
Used for the factory default value
(SCSI ID = 5).
3. Press the power button to turn ON the scanner.
When the scanner is turned ON, the SCSI ID set
at step 2 is enabled.
2.3
Installing the Scanner
Application
For scanning documents with this scanner, both scanner
driver and image capturing application software (called
"application" hereafter) must be installed on your PC.
Two types of scanner driver (FUJITSU TWAIN 32
Scanner Driver or FUJITSU ISIS Scanner Driver) and
application (ScandAll 21 and QuickScan Pro) are pro-
vided for this product. The following sections describe
installation of each driver and application.
For FUJITSU TWAIN32 Scanner Driver
■ Preparation
Confirm the following items before starting to install the
application.
• Prepare the Setup CD-ROM.
• Confirm that the scanner is correctly connected
to your PC.
For details on how to connect the scanner,
refer to "2.2 Connecting the Scanner to
HINT
Your PC" on page 3.
• Uninstall an older version of FUJITSU TWAIN
32 driver if it has already been installed.
Uninstall [Scanner Utility for Microsoft
ATTENTION
Windows] from [Add/Remove Programs]
on the control panel.
Description
fi-4530C Image Scanner Getting Started
• There are two types of FUJITSU TWAIN 32:
One of the following driver software will be
automatically installed according to your Oper-
ating System (OS).
For Windows 98, Windows Me, Windows 2000,
and Windows XP:
FUJITSU TWAIN32 V9
For Windows 95, Windows NT 4.0:
FUJITSU TWAIN32 V8
• When using Windows 95 or Windows NT 4.0:
ASPI Manager V4.01 or later is required (gener-
ally comes with SCSI board products).
■ Installing the FUJITSU TWAIN32
Scanner Driver
Windows XP screenshots are used in
this section. The windows and opera-
HINT
tions may slightly vary depending on
.
your OS
1. Press the power button to turn ON the scanner.
2. Turn on your PC and log on to Windows.
When using Windows NT 4.0, Windows
ATTENTION
2000 or Windows XP, log on as a user
with "Administrator" privileges (privi-
leges of the administrator of your PC)
The scanner may be detected automati-
cally. If so, [Found New Hardware Wiz-
HINT
ard] (or [Add/Remove Hardware Wizard])
dialog box will appear. Click [Cancel] to
close the Wizard window. Windows XP
screenshots are used in this section. The
windows and operations may slightly vary
depending on your OS.
5
ページを印刷する