- ページ 25

ファックス Brother MFC-660CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-660CN 34 ページ。 Caller id
Brother MFC-660CN にも：サービスマニュアル (5 ページ), サービスマニュアル (17 ページ), クイック・スタート・マニュアル (3 ページ)

Installing the Driver & Software

For USB Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4 through 13.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the USB cable to the USB socket

marked with a

USB socket inside the machine on the right as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully guide the USB cable into the trench

as shown below, following the trench aound

and toward the back of the machine. Then,

connect the cable to your computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Lift the scanner cover to release the lock (

Gently push the scanner cover support down

(

) and close the scanner cover (

Note

Make sure that the machine is turned on by

connecting the power cord.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.