- ページ 22

ファックス Brother MFC-680CNのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-680CN 37 ページ。 Brother multifunction printer quick setup guide

ページを印刷する

STEP 2

Installing the Driver & Software

For Network Interface Users

(For Windows

XP Professional x64 Edition/Windows Vista™)

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine on pages 4 through 13.

Note

• The supplied CD-ROM includes ScanSoft™

PaperPort™ 11SE. This software supports

Windows

2000 (SP4 or greater), XP (SP2 or

greater), XP Professional x64 Edition and

Windows Vista™ only. Please update to the latest

Windows

Service Pack before installing MFL-Pro

Suite.

• Please close any applications running before

installing MFL-Pro Suite.

• Make sure there are no memory cards or a USB

Flash memory drive inserted into the media drives

or USB direct interface at the front of the machine.

Disconnect the machine from the power

socket.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

2000 Professional/XP/

Connect the network cable into the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

Carefully guide the network cable into the

trench as shown below, following the trench

around and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

Windows

symbol. You will find the