- ページ 10

スキャナー Fujitsu FI-5015CのPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu FI-5015C 26 ページ。 Image scanner
Fujitsu FI-5015C にも：パンフレット＆スペック (2 ページ), はじめに (24 ページ), 消耗品の交換とクリーニングの手順消耗品の交換とクリーニングの手順 (10 ページ)

■ Indications on the Function

Number Display

The following shows the indications on the Function

Number Display.

No.

Lights only one time upon turning on the scanner.

Indicates that the scanner has been turned ON and

is being initialized.

Indicates that initialization will soon be com-

pleted.

Indicates that initialization has been completed

successfully.

This status is called "Ready Status".

Indicates that a temporary error (that users can

solve) has occurred during the initialization or

scanning of documents.

"U" and an error number (0, 1, 9) are displayed

alternately. Refer section "Temporary error" on

page. AP-3.

To return the scanner to the ready status ("1"),

press the "Scan" or "Send to" button while the

error is indicated. Refer section "Temporary error"

on page. AP-3.

Indicates that a device alarm (that users can not

solve) has occurred during the initialization or

scanning of documents.

"E" and an alarm number (0, 2 ,7, b, c, d) are indi-

cated alternately.

To return the scanner to the ready status ("1"),

press "Scan" or "Send to" button.

If this alarm occurs, turn the power off and then on

again. If the alarm is indicated after turning on the

power again, contact your service engineer.

Descriptions