- ページ 10

スキャナー Fujitsu FI-5900CのPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu FI-5900C 30 ページ。 Consumable replacement and cleaning instructions
Fujitsu FI-5900C にも: インストール手順マニュアル (7 ページ), インストール手順マニュアル (9 ページ), インストール手順 (3 ページ), パンフレット&スペック (2 ページ), 補足マニュアル (4 ページ), はじめに (30 ページ), パンフレット&スペック (4 ページ), 消耗品の交換とクリーニング (24 ページ), 交換手順 (22 ページ), 洗浄方法 (2 ページ)

Fujitsu FI-5900C はじめに
■ Removable Parts
1
No.
Name
1
Document
smoother
2
3
4
5
No.
Name
2
Pick rollers
3
Separator
rollers
4
Brake roller
5
Pad
2
Description
Attached when the stacker posi-
tion is set to align the ejected doc-
ument by the leading edge, or
when scanning documents with
different widths.
Description
Rollers that pick the paper from
the hopper into the ADF. This is a
consumable item.
Rollers used to help separate the
paper as the feeding begins. This
is a consumable item.
Roller used to help separate the
paper as the feeding begins. This
is a consumable item.
Separation Pad used to help sepa-
rate the paper as the feeding
begins. This is a consumable
item.

1.3 Operator panel

The operator panel is located on the right side of the
scanner. The panel consists of a Function Number Dis-
play, buttons and a LED.
Name
Shows the status of the scanner.
Function
For details, refer to "Indications on
the Function Number Display" (page
3).
Use these buttons to adjust the height
Hopper Height
of the Hopper to the Upper/Middle/
Lower Positions.
The hopper moves automatically to
the right position after giving a scan-
ning command. However, this may
cause a delay before the actual scan-
ning starts. To avoid unnecessary
waiting time, it is recommended to set
the hopper height prior to scanning.
The approximate loading capacities
are as follows (* these numbers differ
depending on the document thickness)
Upper: 100 sheets
Middle: 300 sheets
Lower: 500 sheets
Use these buttons to adjust the paper
Paper Thickness
Thin
Thick
thickness for the papers to be scanned.
When picking errors or paper jams
occur:
Press the
When multifeed occurs:
Press the
(Normally no need to change from the
default setting)
Use this button to start linked applica-
Send to
tions (*About the settings, refer to the
"fi-5900C Operator's Guide" on the
Setup CD-ROM).
Scan
Use this button to turn the power ON/
OFF.
When the power is turned on, the but-
ton is illuminated in blue.
Function number display
Function
Hopper Height
Paper Thicknes s
Thin
Thick
Send to
Scan
Function
(Thin) button.
(Thick) button.