- ページ 5

ファックス Brother MFC-8860DNのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Brother MFC-8860DN 7 ページ。 Scan to ftp (file transfer protocol)
Brother MFC-8860DN にも：クイック・セットアップ・マニュアル (41 ページ), セットアップマニュアル (23 ページ), クイック・セットアップ・マニュアル (37 ページ)

5: How to Scan to FTP

As discussed, scanning to an FTP server can either be done manually or through a profile.

The following steps show you how to do both.

5.1: How to manually scan to FTP

Put the document face up in the ADF, or face down on the scanner glass.

Press

Use the dial pad to enter the FTP host address (for example ftp.example.com' Up to 60

characters) or the IP address (for example 192.23.56.189). Press OK.

Use the dial pad to enter the destination folder (for example /brother/abc/, up to 60

characters). Press OK.

Press

If you choose 'Enter Username', go to Step 10.

If you choose 'Change Setting', go to Step 7.

Choose one of the options below.

Press

10. Use the dial pad to enter the username. Press OK.

11. Use the dial pad to enter the password. Press OK.

12. Do one of the following:

13. Press

Colour Start and go to Step 15.

Note

If you want to change the file name manually, go to step 14.

14. Press

15. The LCD shows 'Connecting'. When the connection to the FTP server is successful the

machine starts the scanning process.

Scan to FTP

(Scan).

to choose 'Scan to FTP'. Press OK.

to choose 'Enter Username or Change Setting'. Press OK.

Press

to choose Colour 150 dpi, Colour 300 dpi or Colour 600 dpi. Press

OK and go to Step 8.

Press

to choose B&W 200 dpi or B&W 200x100 dpi. Press OK and go to

Step 9.

to choose 'PDF or JPEG'. Press OK.

to choose 'PDF or TIFF'. Press OK.

If you want to start scanning, press Mono Start or Colour Start and go to Step

15.

If you want to change the file name, go to Step 13.

to choose a file name you want to use and press OK. Press Mono Start or

to choose <Manual>. Press OK.

Enter the file name you want to use (up to 15 characters) and press OK. Press

Mono Start or Colour Start.

-5-