- ページ 5

スキャナー Fujitsu FI-800RのPDF 消耗品交換・クリーニングマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu FI-800R 19 ページ。 Image scanner

Cleaning the Inside of the Scanner (ADF) with Cleaning

Paper

The inside of the ADF can be cleaned with a sheet of Cleaning Paper moistened with

Cleaner F1.

As the scanner continues to feed the documents, paper dust will accumulate inside the ADF

and it may cause scanning errors. Cleaning should be performed approximately every 1,000

sheets scanned. Note that this guideline varies depending on the types of documents you

scan. For instance, it may be necessary to clean the scanner more frequently when you

scan documents on which the toner is not sufficiently fused.

 ATTENTION



Do not use water or mild detergent to clean the ADF.



It may take a long time to dry if an excessive amount of Cleaner F1 is used.

Use only a small amount. Wipe off the cleaner completely to leave no

residue on the cleaned parts.

1. Turn on the scanner

2. Spray the Cleaning Paper with Cleaner F1

3. Insert the Cleaning Paper into the return path opening or load the Cleaning Paper in

the ADF paper chute (Feeder).

Inside the ADF should be cleaned from both the return path opening and the ADF

paper chute (feeder).

o For the return path opening

Insert the Cleaning Paper into the return path opening.