- ページ 2

スキャナー Fujitsu M3099EHのPDF インストール手順をオンラインで閲覧またはダウンロードできます。Fujitsu M3099EH 3 ページ。 M3099 series production document scanners
Fujitsu M3099EH にも： パンフレット＆スペック (2 ページ)

ページを印刷する
Fujitsu M3099EH インストール手順
Fujitsu Video Scanner Installation Procedures
If your model has the old style "L" bracket shipping lock.
3. Slide the scanner to its side as shown in figure below.
4. Unscrew the retainer screw and remove the shipping bracket.
5. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure below)
6. Place scanner back in its normal position
Special note: The M3099A\EX\EH and M4099D do not have a shipping lock.
Step D: Connecting the Scanner.
Warning! Before proceeding ensure that the power is off when connecting or disconnecting the
SCSI cable to the scanner or workstation. Failure to follow the procedure above could result in
damage to the Video card, scanner, and/or your system.
Connect the tail of the "Y" which has the largest connector to the port on the controller
that you installed in the PC. Next connect the RS-232(serial) connector to the RS-232
port on the scanner. Lastly connect the remaining connector (video) to the video port of
the scanner and ensure that all connections are securely fastened.
Rev051806A
Windows 98SE\ME\2000\XP
Page 2 of 3