- ページ 7

プリントサーバー Brother Business Smart MFC-J4510dwのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother Business Smart MFC-J4510dw 47 ページ。 Quick setup guide - spanish
Brother Business Smart MFC-J4510dw にも： マニュアル (36 ページ), マニュアル (22 ページ), 製品安全マニュアル (17 ページ), マニュアル (13 ページ), マニュアル (22 ページ), クイック・セットアップ・マニュアル (47 ページ), マニュアル (18 ページ), パンフレット＆スペック (4 ページ), 製品安全マニュアル (20 ページ), 仕様 (2 ページ), クイック・セットアップ・マニュアル (47 ページ), クイック・スタート・マニュアル (29 ページ), 製品安全マニュアル (25 ページ), (スペイン語）ウェブ・コネクト・マニュアル (38 ページ), (スペイン語）マニュアル (24 ページ), (製品安全ガイドマニュアル (16 ページ), (スペイン語）マニュアル (11 ページ), (クイック設定ガイド (47 ページ)

ページを印刷する
Brother Business Smart MFC-J4510dw クイック・セットアップ・マニュアル
IMPORTANT
• DO NOT take out ink cartridges if you do not
need to replace them. If you do so, it may
reduce the ink quantity and the machine will not
know the quantity of ink left in the cartridge.
• DO NOT repeatedly insert and remove the
cartridges. If you do so, ink may seep out of the
cartridge.
• If you mix the colors by installing an ink
cartridge in the wrong position, clean the print
head several times after correcting the
cartridge installation. (See Cleaning the print
head in Appendix A of the Basic User's Guide.)
• Once you open an ink cartridge, install it in the
machine and use it up within six months of
installation. Use unopened ink cartridges by
the expiration date written on the cartridge
package.
• DO NOT dismantle or tamper with the ink
cartridge, this can cause the ink to leak out of
the cartridge.
• Brother strongly recommends that you do not
refill the ink cartridges provided with your
machine. We also strongly recommend that
you continue to use only Genuine Brother
Brand replacement ink cartridges. Use or
attempted use of potentially incompatible ink
and/or cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or cartridges.
To protect your investment and obtain premium
performance from the Brother machine, we
strongly recommend the use of Genuine
Brother Supplies.
5

Check the print quality

NOTE
Make sure you put paper in the paper tray (for
MFC-J4710DW, tray #1, the upper tray) for the
initial setup.
a
When the preparation process has finished, the
Touchscreen shows Set paper and press
[OK].
Press OK.
b
Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press Yes to
finish the quality check and go to the next step.
If you can see missing short lines, press No and
follow the steps on the Touchscreen.
OK
Poor
7