- ページ 22

プリントサーバー Brother DCP-377CWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-377CW 39 ページ。 Inkjet dcp/mfc
Brother DCP-377CW にも：部品リファレンスリスト (32 ページ), クイック・セットアップ・マニュアル (29 ページ)

ページを印刷する

For Wireless Network Users

For wireless network interface users (DCP-373CW/375CW/377CW only)

Before you begin

First you must configure the wireless network settings of your machine to communicate with your network access

point/router. After the machine is configured to communicate with your access point/router, computers on your

network will have access to the machine. To use the machine from these computers, you will need to install the

drivers and software. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal everyday document printing, place the Brother machine as close to the

network access point/router as possible with minimal obstructions. Large objects and walls between the two

devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and

applications. If you are printing large files, such as multi-page documents with mixed text and large graphics, you

may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput speed.

Although the Brother DCP-373CW/375CW/377CW can be used in both a wired and wireless network, only one of

the connection methods can be used at a time.

IMPORTANT

If you have previously configured the wireless settings of the machine you must reset the network

(LAN) settings before you can configure the wireless settings again.

On your machine, press Menu. Press a or b to choose 3.Network and press OK.

Press a or b to choose 0.Network Reset, and then press OK.

Press a twice to choose Reset and Yes.

The following instructions are for infrastructure mode (connected to a computer through an access point/router).

Infrastructure Mode

Access point/router

Wireless Network machine (your machine)

Wireless capable computer connected to the access point/router

Wired computer connected to the access point/router

Please make sure the wireless network settings of the machine match the access point/router.

Note

To set up your machine in Ad-hoc mode (connected to a wireless capable computer without an access

point/router) you can find instructions in the Network User's Guide on the CD-ROM.

You can view the Network User's Guide by following the instructions below.

1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click Documentation, and then click HTML documents.

For Macintosh:

2 Double-click Documentation, and then double-click your language folder.

3 Double-click top.html.