- ページ 23
スキャナー Fujitsu PA03360-B505 - ScanSnap S500のPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu PA03360-B505 - ScanSnap S500 25 ページ。 Color image scanner
Fujitsu PA03360-B505 - ScanSnap S500 にも： パンフレット＆スペック (2 ページ)
ページを印刷する
5.
Close the ADF cover
ADF cover
You should hear the ADF cover click into position
when it returns to its original position.
6.
Turn on the scanner.
ScanSnap Manager icon changes from
7.
Right click the "ScanSnap Manager" icon
task tray, and select [Check consumable supplies]
from the menu.
8.
In the "Check consumable status" window, click the
[Reset] button of Pad ASSY Count.
The counter is reset to "0".
6.3. Replacing the Pick Roller
Replace the Pick roller following the procedure below.
1.
Remove the document on the Paper chute cover.
2.
Open the ADF cover while pulling the Cover open
lever.
Paper chute
cover
ADF cover
Cover open lever
3.
Adjust the Side guide to the "A5" size.
4.
Remove the Sheet guide.
Pinch the handle on the Sheet guide to remove it.
S
to
.
S
on the
5.
Rotate the Pick roller bushing (left side) in the
direction of the arrow.
Pick roller
6.
Remove the Pick roller with its shaft.
Slightly pull up the left part of the Pick roller shaft
(about 5mm), move it towards the left side, and then
raise it to remove from the scanner.
Pick roller shaft
A5
A5
Sheet guide
Pick roller
ScanSnap S500 Getting Started | 21
Handle
Claw
Pick roller
bushing
Pick roller
shaft