- ページ 10

プリントサーバー Brother DCP-8150DNのPDF ネットワーク・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-8150DN 29 ページ。 Quick setup guide - english
Brother DCP-8150DN にも：マニュアル (36 ページ), 上級ユーザーマニュアル (50 ページ), マニュアル (27 ページ), クイック・セットアップ・マニュアル (23 ページ), ユーザーマニュアル (23 ページ), 製品安全マニュアル (23 ページ)

Configuration for Scan to Network using a Web Browser

Primary SNTP Server Port, Secondary SNTP Server Port



Enter the Port number (1 to 65535).

The Secondary SNTP server port is used as a backup to the Primary SNTP server port. If the Primary

port is unavailable, the machine will contact the Secondary SNTP port. If you have a Primary SNTP

port, but no Secondary SNTP port, simply leave this field blank.



Synchronization Interval

Enter the number of hours between server synchronization attempts (1 to 168 hours).

Note

• You must configure Date&Time to synchronize the time used by the machine with the time server. Click

Date&Time and then configure Date&Time on the General screen. You can also configure the Date &

Time from the machine's control panel.

• Choose the Synchronize with SNTP server check box. You also need to verify your time zone settings

correctly. Choose the time difference between your location and UTC from the Time Zone pull-down list.

For example, the time zone for Eastern Time in the USA and Canada is UTC-05:00.



Synchronization Status

You can confirm the latest synchronization status.

Click Submit to apply the settings.