- ページ 24

スキャナー Fujitsu S510 - ScanSnap - Document ScannerのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu S510 - ScanSnap - Document Scanner 30 ページ。 Color image scanner
Fujitsu S510 - ScanSnap - Document Scanner にも：インストール手順 (3 ページ), 仕様 (2 ページ), クイック・インストール・マニュアル (2 ページ), パンフレット＆スペック (2 ページ), スタートマニュアル (28 ページ), 洗浄方法 (2 ページ)

ページを印刷する

Fujitsu S510 - ScanSnap - Document Scanner スタートマニュアル

1. Replacing the Pick Roller

5. Daily Care

This chapter describes how to clean the ScanSnap.

WARNING

Fire/Electric Shock

● Before cleaning the scanner, disconnect the AC

adapter from the power outlet.

● Do not use any aerosol sprays or alcohol based sprays

to clean the scanner.

Dust blown up by strong air from the spray may enter

the inside of the scanner. This may cause the scanner

to fail or malfunction, or errors in scanned images.

Sparks, caused by static electricity, generated when

blowing off dust and dirt from the outside of the

scanner may cause a fire.

5.1. Cleaning Materials

Cleaning Materials

Parts No.

Cleaner F1

PA03950-0352

Cleaning wipe

PA03950-0419

*1) To purchase the cleaning material, contact the store where you

purchased the scanner or an authorized FUJITSU scanner service

provider.

*2) Pre-moistened with Cleaner F1, Cleaning Wipes are used instead of

moistened cloths.

5.2. Cleaning the Scanner Exterior

Clean the scanner exterior with a cloth moistened with a

small amount of neutral detergent or Cleaner F1 (sold

separately).

Never use paint thinner or other organic

●

solvents.

During the cleaning, prevent water or

●

moisture from getting inside the scanner.

It may take long before the cleaner

●

vaporizes if a large quantity is used. When

cleaning the scanner parts, dampen a

cloth with modest quantities of the

cleaner. In addition, wipe off the cleaner

completely with a soft lint-free cloth to

leave no residue on the surface of the

cleaned parts.

Remarks

1 bottle (100ml) (*1)

1 pack (24 sheets)

(*1) (*2)

Cloth

Neutral detergent

or Cleaner F1

Paint thinner

5.3. Cleaning Inside of the scanner

Clean inside of the scanner with a cloth moistened with

Cleaner F1.

In an alternating succession of scanning documents, the

accumulated paper-powder and dust inside the scanner

causes a scanning error.

As a guideline, clean the ADF every 1,000 scans. Note that

this guideline varies according to the type of documents

you are scanning. For example, the ADF must be cleaned

more frequently when scanning documents on that the

toner has not been sufficiently fixed on.

Clean the ADF according to the following procedure

referring to the illustrations.

WARNING

The glass surface inside the ADF becomes hot during

the scanner operation.

Before you start cleaning the inside of the scanner,

disconnect the AC adapter from the outlet, and wait at

least 15 minutes to let the scanner cool down.

CAUTION

When you perform cleaning, make sure that the inside of

the scanner is free of any foreign object, and be careful

not to get your hand or the cloth caught on the pick

spring (metal part) as a deformed pick spring (metal

part) may cause injury.

Never use water or neutral detergent to

●

clean the inside of the scanner.