- ページ 17
スキャナー Fujitsu S510M - ScanSnap - Document ScannerのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu S510M - ScanSnap - Document Scanner 35 ページ。 Color image scanner
Fujitsu S510M - ScanSnap - Document Scanner にも: インストール手順 (3 ページ), 仕様 (2 ページ), クイック・インストール・マニュアル (2 ページ), スタートマニュアル (24 ページ), 洗浄方法 (2 ページ), 洗浄方法 (2 ページ)
![Fujitsu S510M - ScanSnap - Document Scanner スタートマニュアル](/uploads/products/server2/2440231/2440231.png)
2.2 Connecting the ScanSnap to Your Computer
Follow the procedure below to connect the ScanSnap to your computer.
1. Connect the ScanSnap to a power outlet with the power cable.
2. Connect the ScanSnap to your computer with the USB cable.
• Be sure to connect the power cable before connecting the USB cable.
ATTENTION
• Be sure to install the supplied programs before connecting the ScanSnap to your
computer. For details about the installation, refer to "Installing ScanSnap Manager" (page
15).
The following describes each of the above two procedures.
Connecting the Power Cable
■
Connect the AC cable and adapter as shown below.
CAUTION
Do not use AC adapters other than the following.
Manufacturer
LEI
SANKEN ELECTRIC CO,. LTD
1. Connect the AC cable to the AC adapter (collectively called the power cable).
Use only the supplied AC cable and AC adapter (power cable).
ATTENTION
2. Plug the power cable into the AC adapter connector on the back side of the ScanSnap, and
the other end to a wall outlet.
AC-adapter model number
NU40-2160250-I3
SEB55N2-16.0x (x= A-Z or Blank)
AC cable
AC adapter connector
AC adapter
Outlet
ScanSnap S510M Getting Started
16