スキャナー Fujitsu ScanPartner 15CのPDF インストール手順をオンラインで閲覧またはダウンロードできます。Fujitsu ScanPartner 15C 5 ページ。 Image scanner
Fujitsu ScanPartner 15C にも：ユーザーマニュアル (23 ページ), 仕様 (2 ページ), アップグレードマニュアル (6 ページ), ユーザーマニュアル (26 ページ), 消耗品の交換とクリーニング (7 ページ)

ScanPartner15C\600C\620C\93GX\3091DC\3092DC

Step A: Removing the shipping bracket.

It is recommended that before you connect the scanner to your computer that you inspect the

scanner and remove the shipping bracket first. The SP3091\3092DC's do not have shipping

locks.

Removing the shipping bracket: Your ScanPartner comes with a factory installed

shipping bracket designed to protect the scanner during shipment. Before the scanner

can be used, the shipping bracket must be removed. Follow these instructions to remove

the shipping bracket:

1. Tilt the scanner on its side as shown in figure 2-1

2. Unscrew the retainer screw and remove the shipping bracket.

3. Place the shipping bracket in the "use position" slot and secure it with the retainer

screw (see figure 2-2)

4. Place scanner back in its normal position

Win95\98\ME Installation Procedure

Rev050404A