- ページ 27

プリントサーバー Brother DCP-J4110DWのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Brother DCP-J4110DW 41 ページ。 Guia de wi-fi direct
Brother DCP-J4110DW にも：マニュアル (36 ページ), マニュアル (22 ページ), クイック・セットアップ・マニュアル (27 ページ), 製品安全マニュアル (25 ページ), (スペイン語）ウェブ・コネクト・マニュアル (38 ページ), (スペイン語）マニュアル (24 ページ)

For Wireless Network Users

Enter the Network Key you wrote down in

step 11-a on page 23, and then click Next.

NOTE

If your network is not configured for

Authentication and Encryption, the following

screen will appear. To continue configuration,

click OK and go to j.

Click Next. The settings will be sent to your

machine.

NOTE

• The settings will remain unchanged if you click

Cancel.

• If you want to manually enter the IP address

settings of your machine, click Change IP

Address and enter the necessary IP address

settings for your network.

• If the wireless setup failure screen appears,

click Retry.

Disconnect the USB cable between the

computer and the machine.

Click Next to continue to install MFL-Pro Suite.

Wireless setup is now complete. The

Wi-Fi button at the upper right of the

Touchscreen changes to a four-level

indicator that displays the wireless signal

strength of your access point/router.

The Wi-Fi LED

lights up, indicating that the machine's

Network I/F is set to WLAN.

To install MFL-Pro Suite

For Windows

users:

Now go to

Step 14-e on page 33

For Macintosh users:

Now go to

Step 14-d on page 35

on the control panel