- ページ 4

計測機器 A-M Systems 2100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。A-M Systems 2100 19 ページ。 Isolated pulse stimulator

The Isolated Pulse Stimulator Model 2100 is designed for a wide variety of applications.

It is highly flexible, being capable of delivering single pulses, biphasic pairs, or bursts of

pulses. Pulses may be started manually or upon receiving a trigger signal from another

instrument or computer. Two non-isolated trigger outputs are available for triggering

other instruments.

Four sets of timing controls provide comprehensive control over all aspects of pulse

generation. Three digit accuracy is available over a 7 decade range for each timing

function, using lever wheel switches. Pulse widths can be set over more than a 9

decade range, from 0.5 µs to 999 seconds. Timing accuracy is assured through the

use of a 10 MHz base rate crystal-controlled clock, digitally divided to provide accurate

timing over the entire range. A timing overlap indicator will light if the timing controls

are set inconsistently.

The output may be conveniently switched between current and voltage modes. Pulse

and baseline amplitudes are independently settable with lockable dials. An error

indicator will light if the Model 2100 cannot deliver the desired signal.

The Model 2100 can produce potentially dangerous voltages up to 100 V at the output

connectors. The isolated output is not connected internally to safety (earth) ground in any

way. Some part of the external circuit should be connected to safety ground. Use caution in

handling any wires, connectors, or electrodes which may be directly or indirectly attached to

the Model 2100 output. Some kinds of connectors such as BNC connectors have exposed

metal parts which may float at dangerous potentials unless externally connected to safety

ground. For greatest safety, turn the Model 2100 off before making any connections to

the instrument.

A-M Systems

General Description

WARNING

131 Business Park Loop, P.O. Box 850 Carlsborg, WA 98324

Telephone: 800-426-1306 * 360-683-8300 * FAX: 360-683-3525

E-mail: [email protected] * Website:

http://www.a-msystems.com