- ページ 32
スキャナー Fujitsu ScanSnap iScanner fi-6010NのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Fujitsu ScanSnap iScanner fi-6010N 45 ページ。 Network adf scanner
Fujitsu ScanSnap iScanner fi-6010N にも： 仕様 (2 ページ), スタートマニュアル (21 ページ), パンフレット＆スペック (2 ページ), スタートマニュアル (21 ページ), 洗浄方法 (2 ページ), 洗浄方法 (2 ページ)
ページを印刷する
■ Cleaning the LCD Touch Panel
To prevent the LCD touch panel screen from becoming
dirty, it should be regularly cleaned with a soft, dry
cloth.
Take care when cleaning the LCD touch panel. It can be
easily damaged, and should never be scratched or
banged with hard objects.
Always use a dry (not damp) cloth to
clean the screen. Do not apply
ATTENTION
Cleaner F1.
If dust is allowed to collect and
harden around the frame of the
screen, it can cause the LCD touch
panel to malfunction.
■ Cleaning the Keyboard/Keyboard
Cover
To prevent the keyboard (and/or Keyboard cover) from
becoming dirty, it should also be regularly cleaned with
a soft, dry cloth.
Always use a dry (not damp) cloth to
clean the keyboard (with or without
ATTENTION
cover). Do not apply Cleaner F1.
Replace the keyboard cover if stains
cannot be removed by cleaning.
For more details, refer to the
"Operator's Guide".
To obtain a keyboard cover, contact your FUJITSU
dealer or an authorized FUJITSU scanner service pro-
vider.
Part Name
Part No.
Keyboard
PA03544-
cover
K608
Remarks
1 cover
GBR: English (UK)
■ Cleaning the Carrier Sheet
If the surface or interior of the carrier sheet becomes
dirty or dusty, use a soft dry cloth slightly moistened
with Cleaner F1 (sold separately) or a mild detergent, to
lightly wipe off the dirt and dust.
ATTENTION
21
Never use paint thinner or other
organic solvents.
Do not rub too hard, as the carrier
sheet may become scratched or
deformed.
After cleaning the interior of the
carrier sheet, wait until it has com-
pletely dried before closing it.
As a guideline, it is recommended
to replace the carrier sheet every
500 scans.